Williams Sound PPA R38 Manuel d'utilisateur télécharger pdf (Page 25)

Personal PA

DSP FM Wideband Transmitter

To change the Subnet Mask:

1. Press the Menu button. The display will show “AUDIO SETTINGS” in the selection box.

2. Press the “v” button repeatedly until “ADD-ON-MODULE” is displayed in the selection box.

3. Press the “>” button to access the Add-On Module settings.

4. Press the “v” button repeatedly until “NETWORK SETTINGS” is displayed in the selection box.

5. Press the “>” button to access the Network Settings.

6. The selection box will have “IP ADDRESS MODE” selected. Press the “v” button twice to highlight “SUBNET MASK”

screen. The current Subnet Mask will be shown.

7. Press the “>” button to access the Subnet Mask setting.

8. Using the “v” or “^” buttons, change the rst octet (3 digits) of the Subnet Mask.

9. Press the “>” button to access the next octet.

10. Repeat steps 8 and 9 until the last octet has been changed.

11. When nished setting the Subnet Mask, press the “>” button once to store the Subnet Mask. The T45 will automatically

reboot. When the T45 is nished booting it will be running on the new Subnet Mask.

4c. Admin

The Admin screen is where the web page log in Password is set/reset (the User Name is xed to “admin”), and displaying or not

displaying the IP Address on the front of the T45 can be set.

To change the Network Log-In Password:

1. Press the Menu button. The display will show “AUDIO SETTINGS” in the selection box.

2. Press the “v” button repeatedly until “ADD-ON MODULE” is displayed in the selection box.

3. Press the “>” button to access the Add-On Module settings.

4. Press the “v” button repeatedly until “ADMIN” is displayed in the selection box.

5. Press the “>” button to access the Admin setting. “NETWORK LOG IN” will be shown in the selection box.

6. Press the “>” button to access the Network Log In (Reset Password) Screen.

7. Press the “^” or “v” buttons to change the setting to “NO” or “YES”. If “YES”, a conrmation screen comes up, warning

that remotely connected users may have to log in again.

8. Press the “v” button to highlight “YES”.

9. Press the “>” button. A conrmation screen comes up.

10. Press the “v” button to highlight “YES” and push the “>” button to reset the password.

11. Users on the web page interface must now log in using User Name: “admin” and Password: “admin”. From the web

page, the password can be changed to any desired password. Until the password is changed from the default “admin”, a

red warning bar will persist on the web page, reminding the user that the password needs to be changed.

To change the Front Display to show/not show the IP Address:

1. Press the Menu button. The display will show “AUDIO SETTINGS” in the selection box.

2. Press the “v” button repeatedly until “ADD-ON MODULE” is displayed in the selection box.

3. Press the “>” button to access the Add-On Module settings.

4. Press the “v” button repeatedly until “ADMIN” is displayed in the selection box.

5. Press the “>” button to access the Admin setting. “NETWORK LOG IN” will be shown in the selection box.

6. Press the “v” button once to display “IP ADDRESS DISPLAY” in the selection box.

7. Press the “>” button to access the IP Address Display Screen.

8. Press the “^” or “v” buttons to change the setting to “ON” or “OFF”. If “OFF”, the front display will not display the IP

Address.

9. Press the Main Menu button to exit.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 51 52

Commentaires sur ces manuels

Pas de commentaire

Williams Sound PPA R38 Manuel d'utilisateur Page 25

Commentaires sur ces manuels

Produits connexes et manuels pour Récepteur Williams Sound PPA R38