Williams Sound PPA R37 Guide de l'utilisateur télécharger pdf (Page 18)

RF OUTPUT (M9)

The T35 has three selectable transmitter power levels: FULL, MEDIUM, LOW POWER, or OFF AIR.

By default the T35 is set to “Full” power mode. For general listening applications, FULL power is the

preferred mode of operation. “Full power” provides the T35 with an operating range of up to 1000 ft.

For special listening applications, it may be desirable to reduce the overall operating range on the T35 if:

1) The audio transmission is to be contained to a “smaller” listening area; 2) The signal is too strong

and it is overloading the receiver; or 3) Multiple T35 transmitters are used in adjacent classrooms where

the FM signals overlap each other. In these cases, the power level on the T35 can be reduced to MEDI-

UM or LOW. The RF output may be set to OFF AIR (no power) to help troubleshoot interfering or

overlapping RF signals.

To select a power level:

1) Press the “ ” menu button (Figure 12) to access the “RF Output” (M9) screen.

2) Press the “+” and “-” menu button to select between: FULL POWER, MEDIUM POWER,

LOW POWER and OFF AIR.

3) When the desired power level is displayed, press the “Set” button to save the change into memory.

No additional action is necessary. After 30 seconds of inactivity, the LCD screen will return to the default

display, where the selected power level will be displayed.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 31 32

Pas de commentaire

Williams Sound PPA R37 Guide de l'utilisateur Page 18